Thanks a lot Boris ! Looks like it solved the issue ! Strange, I usually do not stop the service before editing, and never had this problem ?

thank you again

Hi there ! Well, I am running into a problem I have never encountered with Starwind v8 !? I am, as usual, changing the StarWind.cfg file with notepad to change from <iScsiDiscoveryListInterfaces value=0> to <iScsiDiscoveryListInterfaces value=1>. I double check and reopen several times with notepad ...

Problem solved by applying Windows Update (all possible updates on the two nodes) !? Cluster validation Wizard is now reporting no error on storage
Maybe a DSM update ?...

[Hello, I am deploying Native SAN for Hyper-V 2-node 2TB Edition at one of our Customer on two Windows 2012R2 servers. Everything looks OK except MPIO validation during cluster wizard. I get a failure during MPIO validation on disk 0,1,and 2 which are not MPIO disk since the are respectively system ...

I will try this but I thought that the larger the strip-size was the better the perfs were. Especially when HP recommendations are to use larger strip for RAID0,1,10 ! Just to confirm : "SAN volume allocation unit size" : you mean change the strip-size to 64ko iso 256ko on the HP controlle...

Here is another test I made: Created another target on one host, normal starwind device (60GB, no caching by default) on the RAID10 volume (same as CSV), connect the target via host initiator (local), copy syspreped VHD on it, created a vm on the local host Hypervisor, attached the VM to the same te...

HP ACU says Stripe size : 256k, RAID Accelarator "activated"

Hi MAx, thanx for your reply. Well, I will try to open a case on that issue since all the migration plan is stopped at my customer ! To answer your questions : "what is the block size/allocation unit size on the SAN" : do you mean "what is the sRAID configuration at the HP SmartArray ...

For information, I notice the same problem when copying, a 50 GB VHD for instance, from the coordinator node to its CSV2 folder (c:\ClusterStorage\volume2). Like inside the VM it begins at 150-170 MB/s then step by step drop to 20 MB/s ! Problem with the intel X520-t2 10GB NIC or with Starwind synch...

Hello, will try to be as precise as possible 2 node Hyper-V Cluster, SW Native SAN 5.8 1TB edition Ent. Here is the configuration for hosts servers : W2K8R2 Entreprise 24 Go RAM StarWind Native SAN 5.8 Intel E5620 HP SmartArray P410 1 RAID1 300 SAS 15k for OS and Hypervisor (C:\) 1 RAID10 600 Go SAS...

Thanx for your reply
I will try.

Hi,
is there a simple way to extract/open all the data contained into the img files ?
I have several VM inside that I would like to extract from my offline img target.
I don't want to convert img with starwind converter

Thanx