StarWind Software

Environment:
=========
- two virtual Win 2003 Ent Server SP2 machines(N1 and N2) hosted on two different servers
- have created the disk image on N2
- installed StarPort on both virutal servers (N1 and N2)
- is able to connect to the disl from the localhost (N2)

Issue:
=====
- Not able to connect to the disk from N1
- it fails with "No device description"
- checked the StarPort.log, it shows:
********************************************************
3/5 19:54:46.390 CStarPortAPI::InsertiSCSIDevice: ServerAddress = #iscsi:10.208.116.17:3260
3/5 19:54:46.390 CStarPortAPI::InsertiSCSIDevice: Parameter[0] = InitiatorName=iqn.2003-06.com.rocketdivision.starport:n1
3/5 19:54:46.390 CStarPortAPI::InsertiSCSIDevice: Parameter[1] = TargetName=data
3/5 19:54:46.390 CStarPortAPI::InsertiSCSIDevice: Session failed, status == 1326 !
3/5 19:54:46.390 << CStarPortAPI::InsertiSCSIDevice(dwIPAddress=0xAD07411, dwPort=3260, szInitiaotrName=iqn.2003-06.com.rocketdivision.starport:n1, szTargetName=data, szAdditionalParameter=, nTargetID=...)
3/5 19:54:46.390 << CStarPortDoc::CreateiSCSIDevice(IP=0x3A7B40, Port=3260, TargetName=data, Flags=1)
3/5 19:54:46.390 >> CStarPortAPI::~CStarPortAPI()
3/5 19:54:46.390 << CStarPortAPI::~CStarPortAPI()
3/5 19:54:46.390 CWPPiSCSITargetSelection::CreateDevice: Exception caught: Logon to the server failed.
3/5 19:54:46.390 CWPPiSCSITargetSelection::CreateDevice: Failed to connect to create iSCSI device using TargetName=data, IP:0xAD07411, Port:3260
3/5 19:54:46.390 CWPPiSCSITargetSelection::CreateDevice: Creation of the iSCSI device failed with all the addresses supplied by the server.
3/5 19:54:46.390 CWPPiSCSITargetSelection::CreateDevice: Exception caught: Creation of the iSCSI device failed with all the addresses
supplied by the server.
********************************************************


Please help !!!!

What target type are you trying to share?