StarWind Software

Code: Select all

param($addr="10.4.30.3", $port=3261, $user="root", $password="starwind",
$addr2="10.4.30.4", $port2=$port, $user2=$user, $password2=$password,

#common
	$initMethod="Clear",
	$size=100000,
	$sectorSize=512,
	$failover=0,
	$bmpType=2,
	$bmpStrategy=1,
#primary node
	$imagePath="/mnt/sdb1/vol01",
	$imageName="testha02",
	$createImage=$true,
	$storageName="",
	$targetAlias="target02",
	$autoSynch=$true,
	$poolName="pool1",
	$syncSessionCount=1,
	$aluaOptimized=$true,
	$cacheMode="none",
	$cacheSize=0,
	$syncInterface="#p2={0}:3260" -f "10.4.35.2",
	$hbInterface="#p2={0}:3260" -f "10.4.32.11",
	$createTarget=$true,
	$bmpFolderPath="/mnt/md0/nvmevol01", 
#secondary node
	$imagePath2="/mnt/sdb1/vol02",
	$imageName2="testha02",
	$createImage2=$true,
	$storageName2="",
	$targetAlias2="target02",
	$autoSynch2=$true,
	$poolName2="pool1",
	$syncSessionCount2=1,
	$aluaOptimized2=$false,
	$cacheMode2=$cacheMode,
	$cacheSize2=$cacheSize,
	$syncInterface2="#p1={0}:3260" -f "10.4.35.1",
	$hbInterface2="#p1={0}:3260" -f "10.4.32.10",
	$createTarget2=$true,
	$bmpFolderPath2="/mnt/md0/nvmevol02"
	)
	
Import-Module StarWindX
 
try
{
	Enable-SWXLog -level SW_LOG_LEVEL_DEBUG
 
	$server = New-SWServer -host $addr -port $port -user $user -password $password
 
	$server.Connect()
 
	$firstNode = new-Object Node
 
	$firstNode.HostName = $addr
	$firstNode.HostPort = $port
	$firstNode.Login = $user
	$firstNode.Password = $password
	$firstNode.ImagePath = $imagePath
	$firstNode.ImageName = $imageName
	$firstNode.Size = $size
	$firstNode.CreateImage = $createImage
	$firstNode.StorageName = $storageName
	$firstNode.TargetAlias = $targetAlias
	$firstNode.AutoSynch = $autoSynch
	$firstNode.SyncInterface = $syncInterface
	$firstNode.HBInterface = $hbInterface
	$firstNode.PoolName = $poolName
	$firstNode.SyncSessionCount = $syncSessionCount
	$firstNode.ALUAOptimized = $aluaOptimized
	$firstNode.CacheMode = $cacheMode
	$firstNode.CacheSize = $cacheSize
	$firstNode.FailoverStrategy = $failover
	$firstNode.CreateTarget = $createTarget
	$firstNode.BitmapStoreType = $bmpType
	$firstNode.BitmapStrategy = $bmpStrategy
	$firstNode.BitmapFolderPath = $bmpFolderPath
    
	#
	# device sector size. Possible values: 512 or 4096(May be incompatible with some clients!) bytes. 
	#
	$firstNode.SectorSize = $sectorSize
    
	$secondNode = new-Object Node
 
	$secondNode.HostName = $addr2
	$secondNode.HostPort = $port2
	$secondNode.Login = $user2
	$secondNode.Password = $password2
	$secondNode.ImagePath = $imagePath2
	$secondNode.ImageName = $imageName2
	$secondNode.CreateImage = $createImage2
	$secondNode.StorageName = $storageName2
	$secondNode.TargetAlias = $targetAlias2
	$secondNode.AutoSynch = $autoSynch2
	$secondNode.SyncInterface = $syncInterface2
	$secondNode.HBInterface = $hbInterface2
	$secondNode.SyncSessionCount = $syncSessionCount2
	$secondNode.ALUAOptimized = $aluaOptimized2
	$secondNode.CacheMode = $cacheMode2
	$secondNode.CacheSize = $cacheSize2
	$secondNode.FailoverStrategy = $failover
	$secondNode.CreateTarget = $createTarget2
	$secondNode.BitmapFolderPath = $bmpFolderPath2
        
	$device = Add-HADevice -server $server -firstNode $firstNode -secondNode $secondNode -initMethod $initMethod
    
	while ($device.SyncStatus -ne [SwHaSyncStatus]::SW_HA_SYNC_STATUS_SYNC)
	{
		$syncPercent = $device.GetPropertyValue("ha_synch_percent")
	        Write-Host "Synchronizing: $($syncPercent)%" -foreground yellow
 
		Start-Sleep -m 2000
 
		$device.Refresh()
	}
}
catch
{
	Write-Host $_ -foreground red 
}
finally
{
	$server.Disconnect()
}