Can't format ISCSI Disk

Software-based VM-centric and flash-friendly VM storage + free version

Moderators: anton (staff), art (staff), Max (staff), Anatoly (staff)

Post Reply
Altermann
Posts: 2
Joined: Mon Dec 08, 2008 6:02 pm

Mon Dec 08, 2008 6:36 pm

Hi@all,
today I have install Starwind on phys. Server W2k8_x64 with Raid10 .The server has the Hyper-V Role with total phys. 4 Nics.
The ISCSI Nic is conected to a separate Switch and has his own VM-Bus.
For my first tests i have install 2 VMs with W2K8_Ent_x86 for Clustering, but after i've initiated the two ISCSI-Disk to Node 1, I got a failure at the end of the formating the Quorumdisk and Resourcedisk.

Thanks for help.
Andreas Altermann :?:
User avatar
anton (staff)
Site Admin
Posts: 4021
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands
Contact:

Mon Dec 08, 2008 10:11 pm

Start with sending us complete Starwind log. What you've told is not enough to tell what's wrong.
Altermann wrote:Hi@all,
today I have install Starwind on phys. Server W2k8_x64 with Raid10 .The server has the Hyper-V Role with total phys. 4 Nics.
The ISCSI Nic is conected to a separate Switch and has his own VM-Bus.
For my first tests i have install 2 VMs with W2K8_Ent_x86 for Clustering, but after i've initiated the two ISCSI-Disk to Node 1, I got a failure at the end of the formating the Quorumdisk and Resourcedisk.

Thanks for help.
Andreas Altermann :?:
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
Altermann
Posts: 2
Joined: Mon Dec 08, 2008 6:02 pm

Tue Dec 09, 2008 9:20 pm

Hi Anton,
today we sent you the logs. For your information we reinstall Starwind and
StarwindVSS complete on our phy. targethost. Also we install a new
VM too and connected it to the ISCSI-Target via MS Initiator without any problems. But only we're unable to format (NTFS) the ISCSI-Imagedisk.

Could it be possible that Starwind didn't work with MS-Hyper-Bus togehter ? I hope not.

rgds
Andreas
User avatar
anton (staff)
Site Admin
Posts: 4021
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands
Contact:

Wed Dec 10, 2008 8:02 pm

Did you assign drive letter and correctly partition your disk before? What size did you use for it? 2TB+ or not?
Altermann wrote:Hi Anton,
today we sent you the logs. For your information we reinstall Starwind and
StarwindVSS complete on our phy. targethost. Also we install a new
VM too and connected it to the ISCSI-Target via MS Initiator without any problems. But only we're unable to format (NTFS) the ISCSI-Imagedisk.

Could it be possible that Starwind didn't work with MS-Hyper-Bus togehter ? I hope not.

rgds
Andreas
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
alxwood
Posts: 1
Joined: Thu Oct 27, 2011 5:11 pm

Thu Oct 27, 2011 5:13 pm

Did you find a resolution to this issue? I seem to be having the exact same problem... :shock:
Thx
Alex
User avatar
anton (staff)
Site Admin
Posts: 4021
Joined: Fri Jun 18, 2004 12:03 am
Location: British Virgin Islands
Contact:

Thu Oct 27, 2011 6:16 pm

It has passed more then 3 years since reported issue. There are not so many components inside StarWind core left with such a long history so I have no idea do you really have the same issue or not. Start with re-producing the problem and sending us complete StarWind log for analysis. Thanks!
Regards,
Anton Kolomyeytsev

Chief Technology Officer & Chief Architect, StarWind Software

Image
Post Reply